Welcome to china air compressor

Phone

+86 130-8398-8828

WhatsApp

+86 130 8398 8828

Micro heat regenerative adsorption drying machine

Micro heat regenerative adsorption drying machine

Micro heat adsorption drying machine
The principle of voltage transformation adsorption and regeneration cycle, adopt external (electricity heating) micro heat regenerative adsorption drying of compressed air. Comprehensive the advantages of no heat regenerative and heat regenerative dryer, use external heating reduced the loss of regeneration gas, but also to avoid the faults of hot regeneration drying machine will consume large electricity. An adsorption tower adsorption drying under the pressure of work, and the corresponding adsorption tower from the head of another way to extract very little compressed air after decompression, heating process, as regeneration gas on the micro thermal regeneration. The micro thermal regeneration of desiccant. The residual water content has a slash, improves the device can processing capacity.
Conditions of use:
1. Installation site: the ground is flat, without foundation, 80 cm distance from the wall.
2. Installed environment: well ventilated and no dust, no oil pollution.
Working conditions: 1. Ambient temperature: ≦ 40 ℃
2. The regeneration method: electric heating
3. The inlet temperature: ≦ 45 ℃
4. The inlet pressure: 0.7 Mpa ≦ 0.7 Mpa
5. Inlet oil content: < 0.1 PPM
Common parameters: 1. The finished product angry dew point: - 40 ℃ ~ 70 ℃
2. The regeneration gas (4 ~ 6) % rated capacity
3. The adsorbent: activated alumina (Al2O3) or molecular sieve (13 x)
4. Control modes: single chip microcomputer automatic control program
5. The pressure loss: ≦ 0.02 Mpa
6. Power supply: AC 220 v / 380 v, 50 hz
7. Switch cycle: 1 h ~ 4 g is adjustable

Technical Parameter
Parameter model Processing capacity(m3/min) Adsorbent filling amount Heating power (kw) Connection Overall dimensions (mm) Equipment weight (kg)
L H W
CMNL-001XD 1.6 25 0.5 G1″ 950 460 1390 115
CMNL-002XD 2.5 46 0.5 G1″ 1000 510 1390 159
CMNL-003XD 3.8 70 1 G1″ 1000 510 1590 270
CMNL-006XD 6.8 136 2 G1 1/2″ 1100 670 1720 479
CMNL-008XD 8.5 194 3 G1 1/2″ 1100 700 1820 570
CMNL-010XD 10.5 200 5 RC2″ 1200 700 1820 640
CMNL-012XD 14.5 240 6 RC2″ 1200 700 1920 705
CMNL-015XD 17.5 350 6 DN65 1400 820 2000 856
CMNL-020XD 23 480 6 DN80 1400 820 2280 1105
CMNL-025XD 27 560 12 DN80 1500 870 2380 1430
CMNL-030XD 32 670 12 DN80 1600 920 2380 1615
CMNL-040XD 42 880 18 DN100 1800 1020 2500 1920
CMNL-050XD 55 1150 18 DN100 2000 1160 2900 2625
CMNL-060XD 65 1350 18 DN125 2450 1220 2950 3080
CMNL-080XD 85 1800 24 DN125 2650 1360 2950 3885
CMNL-100XD 110 2300 24 DN125 2900 1500 3050 4290
CMNL-120XD 130 2760 30 DN150 3200 1800 3050 5195
CMNL-150XD 170 3100 36 DN200 3500 1900 3100 7300