Wonderful 315kw 420hp 10bar 145psi 50.5m3 /min 1784cfm (Long lasting magnet Variable Pace CZPTn) PMVSD CZPT Rotary CZPT Air CZPT
1. Photos for GREAT PM VSD screw CZPT:
2. CZPT introductions &advantages for seven.5-630kw oil injected PM VSD ( permanent maget variable speed pushed) Rotary CZPT Air CZPT:
Motor:
one) .Oil cooling substantial performance long term magnet motor
2). Insulation grade F, safety quality IP54,adapt to the substantial dusty surroundings. IE4 Efficiency motor performance.
three).Max.RPM 1500,low sounds, substantial efficiency, better lifestyle-span.
four).Split layout, easy maintenance. Simple for installation and support.
five).With no gearbox style, motor is linked directly with rotor through the coupling, higher transmission effectiveness.
six).Lower temperature increase, independent cooling fan design, so that the motor cooling is not affected by the velocity regulation.
7).With PT100 temperature protection switch to avoid substantial temperature degaussing.
eight).Huge speed selection, higher precision and massive adjustment range.
9).CZPTium CZPTic content resist much more than 180ºC temp
ten).Amazing CZPT Saving, conserve up to far more than 30-forty%
CZPT :
1). dual variable frequency inverter
two).Dual variable frequency program: permanent magnet motor variable frequency + cooling enthusiast motor variable frequency , 1-piece built-in structure, severe energy conserving.
three).Continuous pressure air provide: the source strain is exactly controlled beneath .01 MPa.
three).Consistent temperature air supply: consistent temperature set at 85 ºC, with the best lubrication
four).Eliminates empty load, decreases the empty load energy consumption by forty five%.
Remove overpressure
5).Big Frequency selection 30%~ a hundred%
six).Vector air source, correct calculation, guarantee that the air stream of CZPT is consistent with the demand of the consumer technique.
CZPT manage system :
1).Immediate exhibit: discharge temperature, discharge stress, working frequency, current, energy, working condition, and many others.
two).Real-time checking of discharge temperature, discharge strain, recent, frequency fluctuation.
3).Optional the Internet of items module, external cloud intelligent management system, understand the capabilities this kind of as remote start off-end and remote online monitorin
three. Major factors information for Excellent PM VSD screw CZPT :
Positive aspects:
The permanent magnet motor stays higher effectiveness at low speeds, making sure evident strength-conserving advantages in modest air quantity
-Frequency variety from %-one hundred%(widespread conversion from sixty%-one hundred%)
-When compared with the fixed velocity compressor, power conserving 22%-forty%
-In comparison with the widespread inverter compressor, strength conserving 5%-fifteen%
Technique volume fluctuations larger, the vitality-conserving effect far more evident.
four.CZPT Parameters for 7.5-630kw oil injected PM VSD ( permanent maget variable velocity pushed) Rotary CZPT Air CZPT:
| Model | Working stress (Bar) | Movement Air Ability (m3/min) | Energy (Kw) | Sound (dBa) | Dimensions (mm) | Outlet pipe dimension | Weight (Kg) |
| TKLYC-7F | seven/8/10 | one.23/1.16/1.02 | seven.five | 65±3 | 840*670*925 | G3/4 | 350 |
| TKLYC-11F | seven/8/ten | 1.sixty five/one.sixty two/1.four | seven.five | 65±3 | one thousand*820*1145 | G3/four | 390 |
| TKLYC-15F | seven/eight/10 | two.65/2.24/2.one | fifteen | 65±3 | 1300*850*1257 | G1 | 410 |
| TKLYC-18F | seven/eight/ten | three.1/three./2.seven | 18.5 | 65±3 | 1300*850*1257 | G1 | 440 |
| TKLYC-22F | seven/8/10 | 3.8/3.7/3.three | 22 | 65±3 | 1300*850*1258 | G1 | 650 |
| TKLYC-30F | 7/8/10 | 5.3/five.one/four.5 | thirty | 68±3 | 1600*1100*1430 | G1 1/two | 800 |
| TKLYC-37F | seven/eight/10 | six.7/six.five/5.seven | 37 | 68±3 | 1600*1100*1430 | G1 one/two | 850 |
| TKLYC-45F | seven/eight/10 | eight.six/eight./seven.1 | forty five | 68±3 | 1600*1100*1430 | G1 one/two | 900 |
| TKLYC-55F | seven/eight/ten | 10.three/ten.1/nine.three | fifty five | 72±3 | 1750*1150*1500 | DN50 | 1650 |
| TKLYC-75F | 7/eight/10 | 14./13.five/12.five | 75 | 72±3 | 1750*1150*1500 | DN50 | 1800 |
| TKLYC-90F | seven/eight/10 | seventeen.2/fifteen.9/fourteen. | 90 | 72±3 | 2000*1150*1680 | DN50 | 1950 |
| TKLYC-110F | 7/eight/ten | 21.four/19.9/eighteen.one | a hundred and ten | 73±3 | 2300*1540*1900 | DN80 | 2500 |
| TKLYC-132F | 7/8/ten | 24.6/23.8/22.1 | 132 | 73±3 | 2300*1540*1900 | DN80 | 2600 |
| TKLYC-160F | 7/eight/10 | 28.seven/27.one/twenty five.2 | 160 | 75±3 | 2900*1540*2120 | DN80 | 3600 |
| TKLYC-185F | 7/8/10 | 33.five/30.five/27. | 185 | 76±3 | 3100*1940*2389 | DN80 | 4200 |
| TKLYC-200F | seven/eight/ten | 36.5/33.five/thirty.6 | 200 | 78±3 | 3100*1940*2389 | DN100 | 4400 |
| TKLYC-250F | seven/8/10 | forty five.three/43./38.one | 250 | 78±3 | 3400*2050*2330 | DN100 | 4900 |
5.Software :
6.Certification :
seven. Packing:
eight. Factory introduction :
nine. Our Support
nine.1 After-sale Provider
• Any inquiries or requests ahead of, throughout or following sales, we would like to help you any time and will find you the ideal answer in 24 hrs.
• Guarantee: One year for the whole equipment two 12 months for air end , and spare elements will be supplied with best price.
• Over board engineer service is offered.
nine.2 Special CZPT Support
1) Full OEM
• Amount: at least 5 pcs
• In this plan, we will do all the alterations (Shade, name plate and emblem) as your require, and will not cost additional fee.
2) Fifty percent OEM
• Amount: no restrict
• Underneath this software, we can make the necessary alteration (title plate and emblem) but we will charge some further payment for the name plate, as the title plate factory has the MOQ.
3) Brand OEM
• Quantity: no restrict
• Only the logo will be changed to yours, and no further fee will be billed.
nine.3 Overseas Engineer Support
• We are available to send out our engineer for aboard services. Only want you to prepare the accommodation, transportation and translator. Extra cost for each will be talked about based on nearby value stage.
ten. FAQ:
Q1: Are you manufacturing facility or trade company?
A1: We are factory.
Q2: What the precisely deal with of your manufacturing unit?
A2: Our organization is located in the West of the cross of Yijing road and CZPT road, Xihu (West Lake) Dis.li CZPT CZPT Location, ZheJiang , 300300, China
Q3: Guarantee terms of your equipment?
A3: A single year for complete equipment two calendar year for air stop , and complex assistance according to your needs.
Q4: Will you give some spare parts of the machines?
A4: Indeed, of course.we have our possess spare elements companys
Q5: What about item deal?
A5: We pack our goods strictly with CZPT seaworthy case.
Q6: What about the voltage of items?
A6: voltage CZPT in accordance to your equirement.
Q7: Which payment phrase can you settle for?
A7: TT or LC
Q8: How long will you take to prepare manufacturing?
A8: 380V 50HZ we can shipping the items within seven-fifteen days. Other electrical energy or other color we will shipping in fifteen-20 times.
Q9: Can you take OEM orders?
A9: Yes, with expert layout group, OEM orders are hugely welcome.
Q10: Which trade term can you accept?
A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, and so forth.
eleven. Contact:
