• Engine gearboxes are maintenance-free, compact power sources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase options for your own needs.
• Key feature of these drives certainly are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-mounted gear motors are full electromechanical drives in which the speed of the installed electric motor is decreased to the desired value using two to 4 reduction stages. The drives are powerful and durable and feature a concise and lightweight design.
The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent fat loss compared to commercially available drive motors. This is achieved through the consistent application of aluminium die casting technology, which ensures a high amount of rigidity for the gear and motor housing at the same time.
Each drive is produced and tested specifically for every order and customer. A sophisticated modular system permits a great diversity of types and a maximum degree of customization to client requirements.
Because of their integrated control devices, the shaft-mounted gear motors are the ideal drives for applications in reversing setting. In both rotation directions, described end positions are safeguarded by two placement limit switches. This uncomplicated remedy does not only simplify the cabling, but also can help you configure the finish positions quickly and easily. The high shut-off precision of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a metal shaft to carefully turn the pinions for greenhouse ventilation. With the support of electrical panel, it can run and stop after set number of turns. Then it can open up and close the windows for greenhouse ventilation to correct positions.
To maintain the delicate environment inside a greenhouse, environment control systems certainly are a necessity. Several mechanical systems can be used in this respect; however cup vent drive systems tend to be the most famous. The drive system consists of a central gearmotor connected to a 40:1 right angle reducer with dual output shafts. These OP shafts connect to lengthy jack shafts that spread across the roof line of the greenhouse connecting to 
multiple rack and pinion mechanisms that open up and close large glass screen panes in the ceiling for temperature control.
Based on the size of the application form (length of the shafting, amount and weight of the windows panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application form Is generally intermittent used; nevertheless the motors are ranked continuous because the glass pane home windows could potentially be under constant, subtle Greenhouse Gear Motor adjustment throughout the day.
Gear Motor, also referred to as Electric motor Gearboxes, is a particular kind of electrical motor that is designed to create high torque while maintaining a low horsepower, or low swiftness, motor output. Equipment motors can be found in many different applications, specifically for the greenhouse, livestock and agricultural sector, our motors are available options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be very easily taken out without disturbing the entire shaft.
shaft-mounted gear motors are comprehensive electromechanical drives where the speed of the installed electric motor is decreased to the required value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.
