EVI Lower Ambient Temp Air Supply Heat Pump for Residence
CZPT Capacity seven kW ~ 50 kW
Our Item Selection
Product Description
Qualities
Minimal ambient and substantial effectiveness
Most affordable ambient for heating -25ºC, COP is increased than 1.sixty two when hot water inlet/outlet is 50ºC/55ºC, and maximum outlet temp. is 60ºC.
Structure
Panels and base frame are created from galvanized metal safeguarded with polyester powder portray to make sure complete resistance to atmospheric agents.
COMPRESSOR
Airtight scroll type compressor, outfitted with the crankcase heater and thermal protection with thermal overload lower-out and crankcase heater mounted on rubber vibration isolators
AXIAL Supporter
External rotor variety axial fans, outfitted with single phase direct travel motors, low sounds six poles, protection level IP54, plastic blade for reduced noise.
EVAPORATOR
Higher efficiency tank sort heat exchanger, factory insulated with adaptable near mobile materials.
CONDENSER
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, safeguarded with adaptable plastic grill.
REFRIGERANT CIRCUIT
Copper tube relationship with demand valve, filter, sight glass, fuel-liquid separator, electronic expansion valve, low strain switch with computerized reset, large force switch with manual reset.
The warmth pump unit is accomplished also with 4-way valve, liquid receiver and one particular way valve.
WATER CIRCUIT
With no drinking water pump and enlargement tank, but with paddle circulation swap.
CZPT PANEL
is composed of:
CZPT contactor
CZPT security breaker
Supporter motor security breaker
Control circuit protection breaker
Programmable microprocessor controller
Complex Info
Item Model | ASHP-10L | ASHP-15L | ASHP-20L | |||
DB/WB | IN/OUT water | Capacity | Unit | |||
7ºC/6ºC | 36ºC/41ºC | Heating | kW | 9.6 | fourteen.five | 19.1 |
Power enter | kW | 2.5 | three.eight | 5.1 | ||
50ºC/60ºC | Heating | kW | nine.8 | fourteen.5 | 19.eight | |
Power enter | kW | three.three | four.8 | six.5 | ||
-12ºC/-14ºC | 36ºC/41ºC | Heating | kW | 6.one | 9.2 | eleven.eight |
Electrical power input | kW | 2.32 | three.70 | 4.70 | ||
50ºC/60ºC | Heating | kW | 6.6 | 9.8 | twelve.8 | |
Energy input | kW | three.2 | four.eight | six.4 | ||
-20ºC/-ºC | 36ºC/41ºC | Heating | kW | 5.2 | seven.7 | ten.three |
Power enter | kW | 2.30 | three.sixty | 4.sixty | ||
50ºC/55ºC | Heating | kW | 5.four | 8.one | 10.eight | |
Energy enter | kW | 2.9 | 4.3 | 5.eight | ||
-25ºC/-ºC | 36ºC/41ºC | Heating | kW | 4.five | six. | 8.nine |
Energy input | kW | two.forty | three.forty | 4.80 | ||
50ºC/55ºC | Heating | kW | four.seven | six.8 | 9.5 | |
Electrical power enter | kW | two.nine | four.5 | five.9 | ||
35ºC/— | 12ºC/7ºC | CZPT | kW | 7.2 | 10.2 | fourteen.2 |
Energy enter | kW | 2.seven | three.7 | five.2 | ||
CZPT | Type | Scroll | Scroll | Scroll | ||
Brand | CZPT | CZPT | CZPT | |||
Qty | one | one | one | |||
Handle strategies | CZPTtronic enlargement valve | |||||
Condensing admirer | Variety | Axial, plastic supporter blade | Axial, plastic fan blade | Axial, plastic admirer blade | ||
Qty | 1 | two | 2 | |||
Power input | w | 90 | ninety | 90 | ||
Max power input | kW | 4.1 | 5.8 | eight.2 | ||
Max doing work existing | A | eighteen | 29 | 36 | ||
Pipe dimension | R1” | R1” | R1” | |||
Evaporator type | Large effectiveness tank sort warmth exchanger | |||||
Drinking water circulation | CZPT (△5k) | m3/h | one.24 | 1.75 | two.four | |
Heating (△5k/△10k) | mthree/h | 1.58/.seventy nine | two.49/one.25 | 2.9/one.forty five | ||
Water resistance | kPa | forty | forty five | 46 | ||
Refrigerant | Sort | R410A | ||||
Charge volume | kg | 3.6 | 5.3 | 6.one | ||
Doing work variety | ºC | -25ºC-46ºC | ||||
Electricity source | 1N~220V 50Hz | |||||
Dimension | mm | 1200x560x858 | 1000x560x1316 | 1100x620x1316 | ||
Sound stage | dB(A) | 54 | 56 | fifty six | ||
Excess weight | kg | 122 | 150 | 170 |
Observe: With no h2o pump and enlargement tank, but with paddle flow switch
Production Procedure
Device Photographs
Our Manufacturing facility and Certificates
Some Basic Overseas Assignments
Make contact with Us