KY-200KYG Air CZPT (CZPT) :

General Attributes:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the CZPT air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or substitution, users can directly bring cost saveing of 20%-40%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building materials, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption equipment, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
Unique Attributes:
one,AIR Force STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
two,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This influence is not only on the grid, the impact of the complete mechanical technique, but also drastically reduced.
three,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
4,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the era of power, frequeucy conversion push can show its benefits.
five,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the admirer is also pushed by frequency conversion, can drastically minimize the nosie of CZPT function.

Technological PARAMETERS:

Product	Power	Strain (Mpa)	Air circulation	Sounds	Stage	Exit pipe diameter	Fat (KG)	Proportions (mm(LxWxH)
PE-10AVF	seven.5	8	1.	60±2	One quality	3/4	280	a thousand*600*100
		ten	.8
PE-20AVF		eight	2.2	60±2	Single grade	one	480	1150*800*1280
		ten	one.8
PE-30AVF	22	eight	three.8	62±2	Single quality	11/four	520	1150*800*1280
		ten	three.
PE-40AVF	30	eight	5.	63±2	Solitary quality	11/four	550	1150*800*1280
		ten	four.4
PE-50AVF	37	eight	six.eight	63±2	One quality	eleven/two	650	1300*1000*1450
		ten	5.4
PE-60AVF	45	eight	8.	65±2	Solitary grade	eleven/2	750	1300*one thousand*1450
		ten	6.eight
PE-75AVF		8	nine.7	65±2	One grade	2	1200	1700*1270*1500
		ten	eight.6
PE-100AVF	seventy five	8	13.2	65±2	Single grade	2	1350	1700*1270*1500
		ten	16.1

Power-SAVING EFFECT OF TWO-STAGE COMPRESSION:

In accordance to the engineering thermodynamics theory, it is the most affordable for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
CZPT-saving positive aspects:
one,To minimize the bearing load, and increase the volumetric efficincy
2,In the situation of partial load operation, it can improve effectiveness and grow to be power conserving to a better extent.
3,The energy saving of two-stage screw air compressor is up to 15%-twenty five% than that of the one-stage air compressor, which can save the considerable electricity fees every year.

About shipping

Business details

Why choose us?

 

Certification

FAQ:

1.Q:What do you need machine and quotation?

A: According to capacity and factory size ,we can give you details.

two.Q: Are you investing company or company ?

A:We are manufacturing unit.

3.Q:How do we pack machine?

  A:Exporting wooden cases

four.Q:Lead time

A:Around 25-30 days after the receipt of your deposit.